SC.35.CS-CS.1.2 (Discontinued after 2024-2025)

Describe how models and simulations can be used to solve real-world issues in science and engineering.
General Information
Subject Area: Science
Grade: 35
Body of Knowledge: Computer Science - Communication Systems and Computing (Discontinued after 2024-2025)
Date Adopted or Revised: 05/16
Status: State Board Approved

Related Courses

This benchmark is part of these courses.
5002020: Introduction to Computer Science 2 (Specifically in versions: 2016 - 2022, 2022 - 2024, 2024 - 2025 (course terminated))

Related Access Points

Alternate version of this benchmark for students with significant cognitive disabilities.

Related Resources

Vetted resources educators can use to teach the concepts and skills in this benchmark.

Lesson Plans

Florida Tackles Invasive Species: Lesson 3:

Students will use their pseudocode from lesson 2 to create code in the Scratch program that informs viewers about an invasive species in Florida and what citizens can do to help. Finally, students will complete a digital gallery walk to interact with their peers’ projects and take notes on different invasive species.  This is the final lesson in a 3 lesson integrated computer science and civics mini-unit. 

Type: Lesson Plan

Florida Tackles Invasive Species: Lesson 2:

Students will use their lesson one research on an invasive species in Florida to plan an interactive Scratch program. The animation will include at least one option for citizens to control the issue. Students will learn about pseudocoding and how to plan a coding project. This is lesson 2 in a 3-part integrated computer science and civics mini-unit on invasive species.

Type: Lesson Plan

Florida Tackles Invasive Species: Lesson 1:

In this integrated lesson, students will research invasive species and the solutions that Florida citizens can participate in to mitigate the issues associated with them. Students will interact with an example Scratch simulation that illustrates how Lionfish spread.  This is lesson 1 in a 3 part-integrated computer science and civics series to help students understand the invasive species of Florida and how citizens can participate in solving this issue. 

Type: Lesson Plan

Physical Science Unit: Water Beach Vacation Lesson 12 Engineering Design Problem: Beat the Heat Part 3: Testing a Cooler:

In this engineering design problem, students will have the opportunity to apply what they
learned about the changes water undergoes when it changes state through heating and
cooling by designing their own cooler. Students will be asked to use the engineering design
process to design a cooler that will reduce the melting of frozen water in hot temperatures
at the beach. Students will need to design and build their cooler, test their materials, and
justify their design decisions. In this lesson students will test their cooler’s effectiveness in
keeping ice from melting. In subsequent lessons students will improve their designs.

This is a lesson in the Grade 3 Physical Science Unit on Water. This is a themed unit of SaM-1's adventures while on a Beach Vacation.  To see all the lessons in the unit please visit https://www.cpalms.org/page818.aspx.

 

Type: Lesson Plan

Physical Science Unit: Water Beach Vacation Lesson 13 Engineering Design Problem: Beat the Heat Part 4: Improve a Cooler:

In this engineering design problem, students will have the opportunity to apply what they
learned about the changes water undergoes when it changes state through heating and
cooling by designing their own cooler. Students will be asked to use the engineering design
process to design a cooler that will reduce the melting of frozen water in hot temperatures
at the beach. Students will need to design and build their cooler, test their materials, and
justify their design decisions. In this lesson students will improve their cooler designs.

This is a lesson in the Grade 3 Physical Science Unit on Water. This is a themed unit of SaM-1's adventures while on a Beach Vacation.  To see all the lessons in the unit please visit https://www.cpalms.org/page818.aspx.

Type: Lesson Plan

Physical Science Unit: Water Beach Vacation Lesson 10 Engineering Design Problem: Beat the Heat Part 1: Design a Cooler:

In this engineering design problem, students will have the opportunity to apply what they learned about the changes water undergoes when it changes state through heating and cooling by designing their own cooler. Students will be asked to use the engineering design process to design a cooler that will reduce the melting of frozen water in hot temperatures at the beach. Students will need to design and build their cooler, test their materials, and justify their design decisions. This lesson is the first of several lessons based on engineering design; in subsequent lessons, students will build and test their designs with ice.

This is a lesson in the Grade 3 Physical Science Unit on Water. This is a themed unit of SaM-1's adventures while on a Beach Vacation.  To see all the lessons in the unit please visit https://www.cpalms.org/page818.aspx.

 .

Type: Lesson Plan

Physical Science Unit: Water Beach Vacation Lesson 11 Engineering Design Problem: Beat the Heat Part 2: Build a Cooler:

In this engineering design problem, students will have the opportunity to apply what they
learned about the changes water undergoes when it changes state through heating and
cooling by designing their own cooler. Students will be asked to use the engineering design
process to design a cooler that will reduce the melting of frozen water in hot temperatures
at the beach. Students will need to design and build their cooler, test their materials, and
justify their design decisions. In this lesson students will build their cooler. In subsequent
lessons students will test their designs with ice and improve their designs.

This is a lesson in the Grade 3 Physical Science Unit on Water. This is a themed unit of SaM-1's adventures while on a Beach Vacation.  To see all the lessons in the unit please visit https://www.cpalms.org/page818.aspx.

 .

Type: Lesson Plan

Lesson #3 - Moon Phase Unit:

This is the final lesson in the Moon Phase unit. In this lesson, students will complete an algorithm sheet to understand how they can connect the flowchart model to real-world programming. It also gives an insight to various blocks used in Scratch and their significance. This lesson allows students to program in Scratch based on the flowchart model made in the previous lesson and switch the costumes based on the operational conditions placed on the sprite. The final product in this lesson will showcase the students' conceptual understanding of the Moon phases in a computer science medium.

Type: Lesson Plan

Model Eliciting Activity (MEA) STEM Lessons

Physical Science Unit: Water Beach Vacation Lesson 14 Beat the Heat MEA Part 1: Setting up the Cooler Experiment:

this MEA, students will have the opportunity to apply what they learned about describing
the changes water undergoes when it changes state through heating and cooling. This MEA
is divided into four parts. In Part 1 of this activity, students will learn how to set up the
cooler experiment. They will watch a video and take notes. Students will also develop their
hypothesis in preparation to perform the experiment. In part 2, students will be asked to
use ice to test the coolers they designed in Beat the Heat Engineering Design Lessons.
Students will take measurements and collect data on their cooler. In part 3, students will
analyze the data they collected. Finally, in part 4 they will develop a procedure for selecting
the most effective cooler to keep water frozen the longest at the beach. In the optional
twist, students will need to take the mass of the cooler into account.

This is a lesson in the Grade 3 Physical Science Unit on Water. This is a themed unit ofSaM-1's adventures while on a Beach Vacation.  To see all the lessons in the unit please visit https://www.cpalms.org/page818.aspx.

Type: Model Eliciting Activity (MEA) STEM Lesson

Physical Science Unit: Water Beach Vacation Lesson 15 Beat the Heat MEA Part 2: Cooler Experiment:

In this MEA, students will have the opportunity to apply what they learned about describing
the changes water undergoes when it changes state through heating and cooling. This MEA
is divided into four parts. In part 1, students will develop their hypothesis and receive
information on how to set up the cooler experiment. In part 2, students will use ice to test
the coolers they designed in Beat the Heat Engineering Design Lessons. Students will take
measurements and collect data on their cooler. In part 3, students will analyze the data
they collected. Finally, in part 4 they will develop a procedure for selecting the most
effective cooler to keep water frozen the longest at the beach. In the optional twist,
students will need to take the mass of the cooler into account.

This is a lesson in the Grade 3 Physical Science Unit on Water. This is a themed unit of SaM-1's adventures while on a Beach Vacation.  To see all the lessons in the unit please visit https://www.cpalms.org/page818.aspx.

Type: Model Eliciting Activity (MEA) STEM Lesson

Physical Science Unit: Water Beach Vacation Lesson 16 Beat the Heat MEA Part 3: Analyzing Cooler Data:

In this MEA, students will have the opportunity to apply what they learned about describing
the changes water undergoes when it changes state through heating and cooling. This MEA
is divided into four parts. In part 1, students will develop their hypothesis and receive
information on how to set up the cooler experiment. In part 2, students will be asked to use
ice to test the coolers they designed in Beat the Heat Engineering Design Lessons.
Students will take measurements and collect data on their cooler. In Part 3 of this activity,
students will analyze the data they collected in Part 2 by drawing and interpreting a scaled
bar graph and line graph. Students will participate in a discussion about how to interpret the
data that was collected. Finally, in part 4 they will develop a procedure for selecting the best
cooler to keep water frozen the longest at the beach. In the optional twist, students will
need to take the mass of the cooler into account.

This is a lesson in the Grade 3 Physical Science Unit on Water. This is a themed unit of SaM-1's adventures while on a Beach Vacation.  To see all the lessons in the unit please visit https://www.cpalms.org/page818.aspx.

Type: Model Eliciting Activity (MEA) STEM Lesson

Physical Science Unit: Water Beach Vacation Lesson 17 Beat the Heat MEA Part 4: Ranking Procedure:

In this MEA, students will have the opportunity to apply what they learned about describing
the changes water undergoes when it changes state through heating and cooling. This MEA
is divided into four parts. In part 1, students will develop their hypothesis and receive
information on how to set up the cooler experiment. In part 2, students will be asked to use
ice to test the coolers they designed in Beat the Heat Engineering Design Lessons.
Students will take measurements and collect data on their cooler. In part 3, students will
analyze the data they collected. Finally, in part 4 they will develop a procedure for selecting
the best cooler to keep water frozen the longest at the beach. They will communicate their
findings and procedure via a letter to next year’s class. In the optional twist, students will
need to take the mass of the cooler into account.

This is a lesson in the Grade 3 Physical Science Unit on Water. This is a themed unit of SaM-1's adventures while on a Beach Vacation.  To see all the lessons in the unit please visit https://www.cpalms.org/page818.aspx.

Type: Model Eliciting Activity (MEA) STEM Lesson

Physical Science Unit: Water Beach Vacation Lesson 9 Cool Cooler Design Model-Eliciting Activity (MEA):

In this MEA, students will have the opportunity to apply what they learned about describing
the changes water undergoes when it changes state through heating and cooling. Students
will be asked to rank coolers based on data to solve an open-ended, realistic problem, while
considering constraints and tradeoffs. In the optional twist, students will need to take the
mass of the cooler into account.

This is a lesson in the Grade 3 Physical Science Unit on Water. This is a themed unit ofSaM-1's adventures while on a Beach Vacation.  To see all the lessons in the unit please visit https://www.cpalms.org/page818.aspx.

 

Type: Model Eliciting Activity (MEA) STEM Lesson

Physical Science Unit: Properties Lesson 21 Model Eliciting Activity: Entertaining Animals:

In this MEA, students will have the opportunity to apply what they learned about physical properties and measuring linear lengths to a realistic problem. Students will be asked to design a prototype toy for Florida panthers housed at the CPALMS Rehabilitation and Conservation Center. Students will need to describe the physical properties (color, shape, texture, hardness, length) of the toy while explaining the rationale behind their design choices. In the optional twist, students will need to design a prototype toy suitable for a Florida panther with an injured leg. 

This is a lesson in the Grade 3 Physical Science Unit on Properties. This is a themed unit of SaM-1's adventures at the CPALMS Rehabilitation and Conservation Center.  To see all the lessons in the unit please visit https://www.cpalms.org/page818.aspx .

Type: Model Eliciting Activity (MEA) STEM Lesson

Original Student Tutorials

Physical Science Unit: Water Beach Vacation Lesson 17 Video:

This SaM-1 video provides the students with the optional "twist" for Lesson 17 and the Model Eliciting Activity (MEA) they have been working on in the Grade 3 Physical Science Unit: Water Beach Vacation. 

 

To see all the lessons in the unit please visit https://www.cpalms.org/page818.aspx.

Type: Original Student Tutorial

Physical Science Unit: Water Beach Vacation Lesson 14 Video:

This video introduces the students to a Model Eliciting Activity (MEA) and concepts related to conducting experiments so they can apply what they learned about the changes water undergoes when it changes state.  This MEA provides students with an opportunity to develop a procedure based on evidence for selecting the most effective cooler.

This SaM-1 video is to be used with lesson 14 in the Grade 3 Physical Science Unit: Water Beach Vacation. To see all the lessons in the unit please visit https://www.cpalms.org/page818.aspx.

Type: Original Student Tutorial

Physical Science Unit: Water Beach Vacation Lesson 10 Video:

In this video, students will be introduced to an engineering design challenge to apply what they learned about the changes water undergoes when it changes state through heating and cooling by designing their own cooler. Students will be asked to use the engineering design process to design a cooler.

This SaM-1 video is to be used with lesson 10 in the Grade 3 Physical Science Unit: Water Beach Vacation.  To see all the lessons in the unit please visit https://www.cpalms.org/page818.aspx.

Type: Original Student Tutorial

Lesson 21 Video: MEA Entertaining Animals Part 2:

In this video, SaM-1 introduces a part 2 twist to the Model Eliciting Activity (MEA) challenge. In the optional twist, students will need to design a prototype toy suitable for a Florida panther with an injured leg. This first video provides background information on why and how animals need to be entertained.

Type: Original Student Tutorial

Lesson 21 Video: MEA Entertaining Animals:

In this video, SaM-1 introduces a Model Eliciting Activity (MEA) challenge for the students. This video provides background information on why and how animals need to be entertained. Students will have the opportunity to apply what they learned about physical properties and measuring linear lengths as they are asked to design a prototype toy for Florida panthers housed at the CPALMS Rehabilitation and Conservation Center.

In the optional twist, students will need to design a prototype toy suitable for a Florida panther with an injured leg. The optional twist also has a SaM-1 video to introduce the twist challenge.

Type: Original Student Tutorial

Student Resources

Vetted resources students can use to learn the concepts and skills in this benchmark.

Original Student Tutorials

Physical Science Unit: Water Beach Vacation Lesson 17 Video:

This SaM-1 video provides the students with the optional "twist" for Lesson 17 and the Model Eliciting Activity (MEA) they have been working on in the Grade 3 Physical Science Unit: Water Beach Vacation. 

 

To see all the lessons in the unit please visit https://www.cpalms.org/page818.aspx.

Type: Original Student Tutorial

Physical Science Unit: Water Beach Vacation Lesson 14 Video:

This video introduces the students to a Model Eliciting Activity (MEA) and concepts related to conducting experiments so they can apply what they learned about the changes water undergoes when it changes state.  This MEA provides students with an opportunity to develop a procedure based on evidence for selecting the most effective cooler.

This SaM-1 video is to be used with lesson 14 in the Grade 3 Physical Science Unit: Water Beach Vacation. To see all the lessons in the unit please visit https://www.cpalms.org/page818.aspx.

Type: Original Student Tutorial

Physical Science Unit: Water Beach Vacation Lesson 10 Video:

In this video, students will be introduced to an engineering design challenge to apply what they learned about the changes water undergoes when it changes state through heating and cooling by designing their own cooler. Students will be asked to use the engineering design process to design a cooler.

This SaM-1 video is to be used with lesson 10 in the Grade 3 Physical Science Unit: Water Beach Vacation.  To see all the lessons in the unit please visit https://www.cpalms.org/page818.aspx.

Type: Original Student Tutorial

Lesson 21 Video: MEA Entertaining Animals Part 2:

In this video, SaM-1 introduces a part 2 twist to the Model Eliciting Activity (MEA) challenge. In the optional twist, students will need to design a prototype toy suitable for a Florida panther with an injured leg. This first video provides background information on why and how animals need to be entertained.

Type: Original Student Tutorial

Lesson 21 Video: MEA Entertaining Animals:

In this video, SaM-1 introduces a Model Eliciting Activity (MEA) challenge for the students. This video provides background information on why and how animals need to be entertained. Students will have the opportunity to apply what they learned about physical properties and measuring linear lengths as they are asked to design a prototype toy for Florida panthers housed at the CPALMS Rehabilitation and Conservation Center.

In the optional twist, students will need to design a prototype toy suitable for a Florida panther with an injured leg. The optional twist also has a SaM-1 video to introduce the twist challenge.

Type: Original Student Tutorial

Parent Resources

Vetted resources caregivers can use to help students learn the concepts and skills in this benchmark.